How to Clean the Stainless Steel Screen More Effectively?

Nov. 13, 2020

As a Stainless Steel Wire Mesh Supplier, share with you. The use of stainless steel screens has become more widespread with the development of the economy, but many people don't know much about the performance of stainless steel, and they know less about the maintenance of stainless steel. Many people think that stainless steel will never rust. In fact, stainless steel has good corrosion resistance. The reason is that a passivation film is formed on the surface, which exists in the form of a more stable oxide in nature. In other words, although the degree of oxidation of stainless steel varies according to the conditions of use, it will eventually be oxidized. This phenomenon is usually called corrosion.

Liquid Filtration Wire Mesh

Liquid Filtration Wire Mesh

There are bleaching agents and various acids attached to the surface of the stainless steel screen, immediately rinse with water, then immerse in ammonia solution or neutral carbonated soda solution, and wash with neutral detergent or warm water.

Stainless steel surface is dusty and easy to remove dirt, you can wash it with soap, weak detergent, or warm water. The trademark and film on the surface of stainless steel should be washed with warm water, weak detergent, and the binder component should be scrubbed with alcohol or organic solvent (ether, benzene). Grease, oil, lubricating oil pollution on the surface of stainless steel, wipe it with a soft cloth and then clean it with neutral detergent or ammonia solution or special detergent.

There are rainbow patterns on the surface of the stainless steel screen, which is caused by excessive use of detergent or oil. It can be washed away with warm water and mild detergent. The rust caused by dirt on the stainless steel surface can be washed with 10% nitric acid or abrasive detergent. Special detergent for washing. As long as we use the correct maintenance methods, we can extend the service life of stainless steel and maintain its bright, clean and gorgeous style. In the passive film on the stainless steel surface, the weak corrosion resistance is formed due to the self-excited reaction and the formation of small pores, coupled with the approach of chloride ions, a strong corrosive solution is formed, which accelerates the rate of the corrosion reaction.

There is also intergranular corrosion cracking inside the stainless steel, all of which have a destructive effect on the passive film on the surface of the stainless steel. Therefore, the stainless steel surface must be regularly cleaned and maintained to maintain its gorgeous surface and extend its service life. When cleaning the stainless steel surface, you must be careful not to scratch the surface. Avoid using bleaching ingredients and abrasive detergents, steel balls, abrasive tools, etc. To remove the detergent, rinse the surface with clean water after washing.

Our company also has Liquid Filtration Wire Mesh on sale, welcome to contact us.


Home Skype Whatsapp Email