How to clean Custom Stainless Steel Wire Mesh?

Nov. 29, 2019

As a Stainless Steel Wire Mesh Supplier, share the information with you. Stainless steel mesh can be divided into three types: decoration, filtration, and screening. There are many stainless steel filters used in the coal mine industry. Here are some examples:

High-strength Screening Wire Mesh is a mesh that is made by bending stainless steel wires after bending. This type of mesh has strong rigidity, and the mesh is square and the hole is large. It is generally used in the coal mining industry after edging. Another example is stainless steel punched mesh, which is a sheet mesh punched and punched on a metal plate. It has high rigidity, the mesh is not easy to deform, and is resistant to wear and corrosion. Therefore, it is used for screening and selection of coal mines, and it can be seen everywhere in coal washing plants; for example, stainless steel welded wire mesh, which is a mesh welded on the machine and used in coal mine support to protect it from falling debris slag. There are many more reasonable ones that are not listed one by one.

How to clean Custom Stainless Steel Wire Mesh?cid=4

Custom Stainless Steel Wire Mesh

Tips for cleaning and maintaining Custom Stainless Steel Wire Mesh:

The economy of using custom stainless steel wire mesh is becoming more and more pervasive. Everyone's daily life is closely related to custom stainless steel wire mesh, but people's understanding of stainless steel mesh is not comprehensive. It is believed that the stainless steel mesh does not rust, but the fundamental reason is that it is resistant to strong corrosion. The reason is that it can form an anti-oxidation film. To put it another way, according to different operating conditions, the degree of oxidation is different, but it is oxidized, which indicates that it is also called corrosion.

Stainless 耐 custom stainless steel wire mesh The corrosion-resistant screen looks thin and thin. Due to the abrasion caused by the impact, gaps occur, which increases the chloride ion proximity, which forms a fierce corrosive solution and accelerates the rate of corrosion response. Therefore, the appearance of stainless steel screens need regular cleaning and protection in order to maintain a neat appearance and extend the service life. When cleaning the stainless steel screen, it is necessary to pay attention not to damage the cut surface, avoid the use of bleaching ingredients and abrasive washing liquid, steel balls, remove the cleaning liquid and flush with clean water at the end of the cleaning.

Custom stainless steel wire mesh is dust. Simple shovel removes surface dirt. It can be washed with soap or warm water. Stainless steel screens, labels, stickers, wash with warm water, weak detergent, adhesive ingredients, alcohol organic solvents (ether, benzene) scrub. The grease, oil, and lubricating oil of the stainless steel screen is contaminated. Wipe clean with a soft cloth, and then clean with a neutral detergent or ammonia solution or use a special cleaning agent. The appearance of the stainless steel wire mesh with bleach and various acids was immediately washed with water, and then soaked with ammonia solution or neutral carbonated soda solution, or washed with a warm neutral detergent.

Custom Stainless steel wire mesh can not be over-used with detergent or oil. Neutral detergent can be washed with warm water. Stainless steel screens can be cleaned with 10% nitric acid or abrasive cleaner, and can also be cleaned with special medicine.