|
|
| Stainless
steel wire mesh----dutch Weave |
|
Back |
|
| Stainless steel is wear-resisting , heat-resisting ,
acid - resisting and corrosion resisting. Just because of these characteristics,
the wire mesh made of stainless steel is extensively used in mining,
chemical industry, food industry and pharmaceutical industry. |
 |
| |
 |
Plain dutch weave: Woven as a plain weave, but with
the warp wires of greater diameter than the weft wires. The weft wires
are very close together so that a so-called zero-mesh structure is
formed; while the warp wires are thicker and arranged wider apart. |
| |
|
| Twill dutch weave: "Twill" indicates the warp
and weft wires pass alternately above two and below two wires. "Dutch"
refers to the use of a heavier warp wire diameter in conjunction with
a lighter weft wire diameter. This weave shows a combination of twill
and dutch weave. |
 |
| |
|
| Mesh |
Wire
Dia. (MM) |
Material(AISI) |
| 12meshX64mesh |
0.58/0.40 |
304
or 316 |
| 24meshX110mesh |
0.36/0.25 |
304
or 316 |
| 14meshX88mesh |
0.50/0.33 |
304
or 316 |
| 30meshX150mesh |
0.18/0.14 |
304
or 316 |
| 40meshX200mesh |
0.14/0.11 |
304
or 316 |
| 50meshX250mesh |
0.10/0.071 |
304
or 316 |
| 80meshX700mesh |
0.06/0.05 |
304
or 316 |
| 165meshX800mesh |
0.071/0.040 |
304
or 316 |
| 165meshX1400mesh |
0.05/0.032 |
304
or 316 |
| 200meshX1800mesh |
0.05/0.03 |
304
or 316 |
| 325meshX2300mesh |
0.030/0.025 |
316L |
| 400meshX2800mesh |
0.030/0.02 |
316L |
|
|
